Sheffield Research/GTC CM100 1 mA to 100A Current Clamp Meter
Product Details:
* Measure currents in circuits like battery chargers, alternators, leakage currents, electrical loads, etc.* Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
* Check components like: Alternator, Diodes, Relays and Ignition Coils, Spark Plug Wires, Magnetic Pickups, Motors, Switches, Fuses, etc.
Small jaw: 1.2"(W) x 0.53" (D) (300x13.4mm), Clamp opens up to 1/2 inch (12.5 mm), One rotary switch operation , Large 4 digit LCD display, AC/DC Voltage measurement up to 600 Volt, AC/DC current measurement from 0.001 up to 100 A, Relative measurement, One touch auto zero, Peak Hold Function, Data Hold Function, Resistance measurement, 2 readings per second sampling, Continuity check with audible indicator, Protective hand guard, Low battery indicator, Auto power off, 50 hrs in use battery life, Soft carrying deluxe pouch, Test leads and batteries included
Product Specifications:
Includes:* CM100
* Soft Pouch
* 2 x 35½" (0.9 m) test probes
* 2 x 1.5 V AAA alkaline battery
* User°s Manual.
Specifications:
* Power source: Two (2) Standard AAA 1.5 Volt alkaline battery type AAA UM4 or equivalent
* Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35½" long
* DC Voltage: ± 2% ± 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection
* AC Voltage: ±1.5% ± 5 dgts., 50 to 500 Hz, 600 V ac/dc maximum, 660Vrms overload protection
* DC Current: ± 2.5 % ± 10 dgts., 100 Amp. maximum, 150 Arms overload protection
* AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 150 Arms overload protection
* Resistance: ±1% ± 3 dgts., 100KO 660Vrms overload protection
* Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 1000 O, max. voltage test < 3 Vdc.
